The 5th wheel hitch lock installs by inserting through the base rail and 5th wheel leg anchor, replacing one of the pins securing the 5th wheel hitch. Unlike a standard hitch pin, the extra-long pin design allows it to pass through the rail and out the other side with plenty of clearance. It is able to fit any industry-standard 5th wheel rail, featuring a 1/2" diameter. Limited Lifetime Warranty (One-Year Finish, One-Year Parts).

2000 is a standard factory replacement ball. When extra height is needed use the 2050 High Rise Ball. 2050 rating is 20,000 Lb. GTW.

2000 is a standard factory replacement ball. When extra height is needed use the 2050 High Rise Ball. 2050 rating is 20,000 Lb. GTW.

Ford Foot Pad Kit consist of the following: 1-Left Front Foot Pad; 1-Right Front Foot Pad; 2-Rear Foot Pad; 2-4.5" Adhesive Strip; 2-8" Adhesive Strip.

Used with Traditional Series SuperGlide #3100. Raises hitch three inches to allow greater clearance between truck bed and fifth wheel trailer.

For use with the Universal Capture Plate, when you can't easily remove it from the pin box, and you need to pull the trailer with a standard fifth wheel hitch. Simply remove the SuperGlide hitch plate, place it on the trailer's king pin, and attach the Conversion Adpater on the hitch plate.

Currently used exclusivly on our #3600 24K SuperGlide, SlipPlate was also used in conjunction with previous models of other SuperGlide hitches. Spray on Graphite Paint coating cures overnite to a hard, dry, long lasting protective barrier and eliminates the need for heavy grease on SuperGlide hitch “way tubes”. Stays on longer than heavy grease, and keeps things clean & dust free.

Designed to fit a specific pin box.

Designed to fit a specific pin box.

Designed to fit a specific pin box.

10" Lube plate for 5th wheel hitch.

Conveniently store your trailer cable when not in use. Attaches to the base or side of the 5th wheel kingpin by using strong magnetic application. Features: Great for travel trailers and 5th wheels, Safe, secure cord storage, Stores outside the Pin Box to discourage animals from building nests, Helps prevent wire cuts and fraying, Securely keeps cord off the ground, Strong magnetic application.

Efficient storage solution for your extension cord. Unobtrusive mount saves space in your baggage compartment. Stores up to 50' of an extension cord. Docking plate and hardware included. Reel dimensions: 9-5/8" diameter X 3" deep. Mounting bracket dimensions: 1/2" long X 4-1/8" wide x 3" tall. NOTE: Cord Not Included.

Fifth Wheel tube spacer kit (2002-2008) Dodge Ram 1500, (2003-2009) Dodge Ram 2500/3500"

Fifth wheel rubber bumper installation kit. Fits Reese 30032 & 30047 fifth wheels and Draw-tite 6001 & 6032.

Foam handle grip, easy slide on installation.

Fits all Reese 1/2" pull pins. Great for locking down 5th wheel hitches. Prevents theft and unwanted removal of pins, add a standard padlock to make the locking plate a security device.

1/2" x 1-1/2" long, attaches mounting brackets to frame, used for 5th wheel hitch installations.

This kit includes the custom quick install brackets, reduces install time by up to 50%, all hardware is included.

This kit includes the custom quick install brackets, reduces install time by up to 50%, all hardware is included.

Elite™ Series Under-Bed Gooseneck Accessories Kit. Includes: (1) 2-5/16" Pop-In™ Ball #19311, (1) Storage Bag, (2) Safety Chain Attachments & (1) Hole Cover.

Plastic Bedliner Puck Adapter Kit (Includes: (4) Pucks & (4) Spacers)

This REESE Gooseneck 2-5/16 hitch ball is for use with 9466 Gooseneck heads only. It also can be used with Under-bed Goosenecks 9476. It has a one inch rise and a lifetime warranty. Features: Pop-In Ball: Lever inside ball head activates ball bearing locking system, Lift and turn lever to unlock and remove ball, Fits Ford & Nissan's with factory installed OE rail system or aftermarket Reese rails. NOTE: Not for use with GM Factory installed rail systems.

3" Pop-In™ Ball for Elite™ Under-Bed Bolt-On Gooseneck Head & Hide-A-Goose Head #9466 & Under-Bed Gooseneck Head #9476

Features: Pop-In Ball: Lever inside ball head activates ball bearing locking system, Lift and turn lever to unlock and remove ball. Includes: Two safety chain holders, Hole cover keeps Pop-In Ball sleeve free of debris, Storage bag. Fits RAM OEM Kits with factory installed OE rail system.

Replacement Part, 4 Hole Style Pins (Qty. 4) & Clips (Qty. 4) for Reese Outboard Fifth Wheel Mounting Rails #30153 896-53"

Receiver Lock, Barrel Style w/Bent Pin, 1/2" for Fifth Wheel Base Rails

Reese outer frame (outboard) fifth wheel custom quick install brackets. Series# 56000. Requires 48" wide rail kit (30153) part# 896-50.

Replacement Part, Service Kit Adapter Foot for Signature Series Fifth Wheels & Goosenecks is Required When Used on 2011 Ford Reese Elite™ Series & OEM Rail Kits.

Eliminate messy grease to lubricate 5th wheel, gives extra protection from wear and tear.

Eliminate messy grease to lubricate 5th wheel, gives extra protection from wear and tear.

Nylon Lube Plate Protects 5th Wheel Plate from the Wear of Normal Towing. Use with R16 Only. Eliminates the Need for Messy Grease.

The Lippert Components 286160 is a fifth wheel trailer hitch lube disc that excels at reducing noise during tows. Standard lube disks are usually poorly lubricated materials that allow the hitch to be jerked around and will produce loud noises during transport. With the Lippert Components 286160 Never Fail Whisper Disk you will never have to worry about wear and tear or noise.

Eliminate messy grease to lubricate 5th wheel, gives extra protection from wear and tear.

Custom Wedges for Sidewinder & 5th Airborne Sidewinder. These wedges are used to prevent the trailer from pivoting at its normal location. Designed for specific fifth wheel trailer hitches.

World's first OE approved gooseneck adapter, Endorsed by Lippert Components, Inc. for their frame systems • Fits Lippert #1621 and #1716 wing sets • Rated for 16,000 lb. capacity utilizing both CSA & SAE J2638 test standards • Limited Lifetime Warranty.

Reese custom spacer kit is needed for wider trailer wingsets to ensure a snug fit with the 20K Sidewinder pin box. Engineered for a perfect fit and tested to meet or exceed industry standards and backed by a limited lifetime warranty. Spacer kit required for installation on: Lippert #1716, Lippert #1116, Lippert #0115. Includes: 2 spacer plates and 4 roll pins.

Custom Wedges for Sidewinder & 5th Airborne Sidewinder. These wedges are used to prevent the trailer from pivoting at its normal location. Designed for specific fifth wheel trailer hitches.

Custom Wedges for Sidewinder & 5th Airborne Sidewinder. These wedges are used to prevent the trailer from pivoting at its normal location. Designed for specific fifth wheel trailer hitches.

Custom Wedges for Sidewinder & 5th Airborne Sidewinder. These wedges are used to prevent the trailer from pivoting at its normal location. Designed for specific fifth wheel trailer hitches.

Custom Wedges for Sidewinder & 5th Airborne Sidewinder. These wedges are used to prevent the trailer from pivoting at its normal location. Designed for specific fifth wheel trailer hitches.

This adapter kit allows the Mor/ryde Pin Box System to be used with your Pullrite SuperGlide hitch. It replaces your current Pullrite Capture Plate.

Custom Wedges for Sidewinder & 5th Airborne Sidewinder. These wedges are used to prevent the trailer from pivoting at its normal location. Designed for specific fifth wheel trailer hitches.

Custom Wedges for Sidewinder & 5th Airborne Sidewinder. These wedges are used to prevent the trailer from pivoting at its normal location. Designed for specific fifth wheel trailer hitches.

Custom Wedges for Sidewinder & 5th Airborne Sidewinder. These wedges are used to prevent the trailer from pivoting at its normal location. Designed for specific fifth wheel trailer hitches.

Custom Wedges for Sidewinder & 5th Airborne Sidewinder. These wedges are used to prevent the trailer from pivoting at its normal location. Designed for specific fifth wheel trailer hitches.

Custom Wedges for Sidewinder & 5th Airborne Sidewinder. These wedges are used to prevent the trailer from pivoting at its normal location. Designed for specific fifth wheel trailer hitches.