Surface mount lights with two bulbs for longer life and an oval shaped reflex lens. Pre-wired with a 6" supply lead and are self-grounding. *Lenses also fit Bargman oval style lights. Measures 4" x 2" x 1-1/32" D.

Surface mount lights with two bulbs for longer life and an oval shaped reflex lens. Pre-wired with a 6" supply lead and are self-grounding. *Lenses also fit Bargman oval style lights. Measures 4" x 2" x 1-1/32" D.

Miroflex #349 4" x 2" x 1", constructed of rugged plastic with snap-on acrylic lens of red or amber. #57 bulbs.

Miroflex #349 4" x 2" x 1", constructed of rugged plastic with snap-on acrylic lens of red or amber. #57 bulbs.

Miroflex #349 4" x 2" x 1", constructed of rugged plastic with snap-on acrylic lens of red or amber. #57 bulbs.

Miroflex #349 4" x 2" x 1", constructed of rugged plastic with snap-on acrylic lens of red or amber. #57 bulbs.

Acrylic lens features built in reflex reflector and exclusive prism optics for brilliant signal. Eliminates separately mounting a reflector. Uses a patented socket to prolong bulb life. Dimensions: 4-1/8" x 2" W x 1-1/32" D.

1 diode. Assembled in USA. Hardwired design. PC Rated. Functions as clearance and side marker light when properly installed. Compatible with all 12 volt systems. 8" (200 mm) hardwired leads available stripped, with .180 bullets, or AMP-style connector. Does not require "Top" positioning to meet FMVSS 108 standard. Includes rubber mounting grommet. Diameter: 3/4".

Designed to mount 171, 176, 177, 181 and 271 series marker/clearance lights in 0.75" (19 mm) hole. Grommet made of UV-resistant polymer rubber; stays flexible and prevents cracking for extended service life. Standard grommet provided with all 3/4" series lights. Grommet designed to fit .0179" to .1875" thick panels.

Surface mounts 171, 176, 177, 181 and 271 series lights. Use of 177-18 grommet (provided with all 3/4" series lights) is required for mounting light into bracket. High-strength, corrosion-free, UV-resistant grey polymer. Available to fit both flat and curved surfaces. Easily mounts with two screws (not included). Dimensions: 3.9" L X 1.3" H X 1.06" W.

Surface mounts 171, 176, 177, 181 and 271 series lights. Use of 177-18 grommet (provided with all 3/4" series lights) is required for mounting light into bracket. High-strength, corrosion-free, UV-resistant grey polymer. Available to fit both flat and curved surfaces. 176-13 has 4.6" radius curve for proper fit on curved surfaces. Easily amounts with two screws (not included). Dimensions: 4.07" L X 1.34" H X 1.54" W.

Fitment: P/N 108 & P/N 2549.

Acrylic lens features built in reflex reflector and exclusive prism optics for brilliant signal. Eliminates separately mounting a reflector. Uses a patented socket to prolong bulb life. Dimensions: 4-1/8" x 2" W x 1-1/32" D.

Fitment: P/N 108 & P/N 2549.

Rectangular, one bulb clearance or side marker light with built-in reflex; eliminates need for separate reflector. Surface mounts on 3-3/8" centers with mounting gasket included. Twist-in socket assembly contains both lead wire and ground wire for mounting on all surfaces. Available in amber or red.

Rectangular, one bulb clearance or side marker light with built-in reflex; eliminates need for separate reflector. Surface mounts on 3-3/8" centers with mounting gasket included. Twist-in socket assembly contains both lead wire and ground wire for mounting on all surfaces. Available in amber or red.

Popular for RV applications. Lens and base welded to form single sealed unit. Includes .175" thick closed cell cushion for mounting. Twist-out bulb socket for easy bulb replacement. Two-wire electrical connection. Integral Reflex. Dimensions: 3.875" L X 1.875" H X 0.75" W.

Popular for RV applications. Lens and base welded to form single sealed unit. Includes .175" thick closed cell cushion for mounting. Twist-out bulb socket for easy bulb replacement. Two-wire electrical connection. Integral Reflex. Dimensions: 3.875" L X 1.875" H X 0.75" W.

1 diode. Assembled in USA. Hardwired design. PC Rated. Functions as clearance and side marker light when properly installed. Compatible with all 12 volt systems. 8" (200 mm) hardwired leads available stripped, with .180 bullets, or AMP-style connector. Does not require "Top" positioning to meet FMVSS 108 standard. Includes rubber mounting grommet. Diameter: 3/4".

Surface mount base, mounts on 3" centers. Snap-on, replaceable lens with reflex eliminates need for separate reflector. Two-wire design includes both lead and ground wire for mounting to all surfaces. Lifetime LED Warranty. Acrylic lens, ABS housing. Dimensions: 4" W X 2" H X 1" D.

Surface mount base. Snap-on, replaceable lens with reflex eliminates need for separate reflector. Two-wire design includes both lead and ground wire for mounting to all surfaces. Lifetime LED Warranty. Polycarbonate lens and housing. No gasket. Dimensions: 2-1/2" H X 2-1/2" W X 13/16" D.

Sealed, waterproof design. PC rated when mounted in any direction - 360 degrees! Hard wired, includes separate ground wire. Lifetime LED Warranty. Includes A11GB grommet. Size/Shape: 3/4" Round. Dimensions: 0.730" W X 0.730" H X 0.938" D.

Sealed, waterproof design. PC rated when mounted in any direction - 360 degrees! Hard wired, includes separate ground wire. Lifetime LED Warranty. Includes A11GB grommet. Size/Shape: 3/4" Round. Dimensions: 0.730" W X 0.730" H X 0.938" D.

Surface mount base, mounts on 3" centers. Snap-on, replaceable lens with reflex eliminates need for separate reflector. Two-wire design includes both lead and ground wire for mounting to all surfaces. Lifetime LED Warranty. Acrylic lens, ABS housing. Dimensions: 4" W X 2" H X 1" D.

Surface mount base, mounts on 3" centers. Snap-on, replaceable lens with reflex eliminates need for separate reflector. Two-wire design includes both lead and ground wire for mounting to all surfaces. Lifetime LED Warranty. Acrylic lens, ABS housing. Dimensions: 4" W X 2" H X 1" D.

Surface mount base, mounts on 3" centers. Snap-on, replaceable lens with reflex eliminates need for separate reflector. Two-wire design includes both lead and ground wire for mounting to all surfaces. Lifetime LED Warranty. Acrylic lens, ABS housing. Dimensions: 4" W X 2" H X 1" D.

Surface mount base, mounts on 3" centers. Snap-on, replaceable lens with reflex eliminates need for separate reflector. Two-wire design includes both lead and ground wire for mounting to all surfaces. Lifetime LED Warranty. Acrylic lens, ABS housing. Dimensions: 4" W X 2" H X 1" D.

Surface mount base, mounts on 3" centers. Snap-on, replaceable lens with reflex eliminates need for separate reflector. Two-wire design includes both lead and ground wire for mounting to all surfaces. Lifetime LED Warranty. Acrylic lens, ABS housing. Dimensions: 4" W X 2" H X 1" D.

Surface mount on 2.7" centers. Ultra-thin design, less than 3/8" thick. Snap-on lens with reflex eliminates the need for a separate reflector. Hard wired, includes lead wire, ground wire and pre-installed gasket. Lifetime LED Warranty. Polycarbonate lens and housing. Dimensions: 4" W X 2" H X 0.7" D.

Surface mount on 2.7" centers. Ultra-thin design, less than 3/8" thick. Snap-on lens with reflex eliminates the need for a separate reflector. Hard wired, includes lead wire, ground wire and pre-installed gasket. Lifetime LED Warranty. Polycarbonate lens and housing. Dimensions: 4" W X 2" H X 0.7" D.

Surface mount base. Snap-on, replaceable lens with reflex eliminates need for separate reflector. Two-wire design includes both lead and ground wire for mounting to all surfaces. Lifetime LED Warranty. Polycarbonate lens and housing. No gasket. Dimensions: 2-1/2" H X 2-1/2" W X 13/16" D.

Command Rectangular 12-volt Clearance Light w/rounded Corners. Socket is waterproof. Mounting screws are concealed beneath cover. Polar White. SAE Approved. Choose from Red or Amber Lens. Replacement lens available. Dimensions:3-7/8" L x 1-7/8" W x 1 3/4" D..

Command Rectangular 12-volt Clearance Light w/rounded Corners. Socket is waterproof. Mounting screws are concealed beneath cover. Polar White. SAE Approved. Choose from Red or Amber Lens. Replacement lens available. Dimensions:3-7/8" L x 1-7/8" W x 1 3/4" D..

Command Rectangular 12-volt Clearance Light w/rounded Corners. Socket is waterproof. Mounting screws are concealed beneath cover. Polar White. SAE Approved. Choose from Red or Amber Lens. Replacement lens available. Dimensions:3-7/8" L x 1-7/8" W x 1 3/4" D..

Command Rectangular 12-volt Clearance Light w/rounded Corners. Socket is waterproof. Mounting screws are concealed beneath cover. Polar White. SAE Approved. Choose from Red or Amber Lens. Replacement lens available. Dimensions:3-7/8" L x 1-7/8" W x 1 3/4" D..

Socket is waterproof and is assembled with a slight but firm rotating motion. Mounting screws are concealed beneath cover. Polar White. SAE Approved.

Socket is waterproof and is assembled with a slight but firm rotating motion. Mounting screws are concealed beneath cover. Polar White. SAE Approved.

Socket is waterproof and is assembled with a slight but firm rotating motion. Mounting screws are concealed beneath cover. Polar White. SAE Approved.

Socket is waterproof and is assembled with a slight but firm rotating motion. Mounting screws are concealed beneath cover. Polar White. SAE Approved.

The MC32 series rectangular clearance / side marker light with the Reflex lens eliminates the need for a separate reflector to meet DOT requirements. Twist-in socket contains both lead wire and ground wire for mounting to all surfaces. It features snap-on, replaceable lens and easy to change replaceable #194 bulbs. All-weather molded plastic housing and durable lens protect against corrosion. Surface mount on 3" centers. Amber or red. Available with a white or black base. Works with 12.8VDC-0.2A. Dimensions: 4" x 2" x 1.25".

The MC32 series rectangular clearance / side marker light with the Reflex lens eliminates the need for a separate reflector to meet DOT requirements. Twist-in socket contains both lead wire and ground wire for mounting to all surfaces. It features snap-on, replaceable lens and easy to change replaceable #194 bulbs. All-weather molded plastic housing and durable lens protect against corrosion. Surface mount on 3" centers. Amber or red. Available with a white or black base. Works with 12.8VDC-0.2A. Dimensions: 4" x 2" x 1.25".

The MC32 series rectangular clearance / side marker light with the Reflex lens eliminates the need for a separate reflector to meet DOT requirements. Twist-in socket contains both lead wire and ground wire for mounting to all surfaces. It features snap-on, replaceable lens and easy to change replaceable #194 bulbs. All-weather molded plastic housing and durable lens protect against corrosion. Surface mount on 3" centers. Amber or red. Available with a white or black base. Works with 12.8VDC-0.2A. Dimensions: 4" x 2" x 1.25".

The MC32 series rectangular clearance / side marker light with the Reflex lens eliminates the need for a separate reflector to meet DOT requirements. Twist-in socket contains both lead wire and ground wire for mounting to all surfaces. It features snap-on, replaceable lens and easy to change replaceable #194 bulbs. All-weather molded plastic housing and durable lens protect against corrosion. Surface mount on 3" centers. Amber or red. Available with a white or black base. Works with 12.8VDC-0.2A. Dimensions: 4" x 2" x 1.25".

The MC32 series rectangular clearance / side marker light with the Reflex lens eliminates the need for a separate reflector to meet DOT requirements. Twist-in socket contains both lead wire and ground wire for mounting to all surfaces. It features snap-on, replaceable lens and easy to change replaceable #194 bulbs. All-weather molded plastic housing and durable lens protect against corrosion. Surface mount on 3" centers. Amber or red. Available with a white or black base. Works with 12.8VDC-0.2A. Dimensions: 4" x 2" x 1.25".

Commonly used by Fleetwood and many other RV Manufactures

Commonly used by Fleetwood and many other RV Manufactures

Miroflex #349 4" x 2" x 1", constructed of rugged plastic with snap-on acrylic lens of red or amber. #57 bulbs.